https://community.hpe.com/t5/bladesystem-general/stacking-links-question/m-p/6933574#M30055 <P>I'm in the process of importing several enclosures into Oneview.&nbsp; Prior to importing I want to make all of the VC uplinks identical.&nbsp; May be important to mention that all of my enclosures are their own VC domain - no enclosures linked together.&nbsp; One enclosure has VC ports X1 connected to our iscsi network.&nbsp; I need to move that to ports X8 so it matches all of the others enclosures.&nbsp; First I assume I will need to delete the iscsi uplink?&nbsp; Then&nbsp;just move the cable and recreate the uplink?&nbsp; X8 is currently assign as &nbsp;a Stacking Link.&nbsp; Will that automatically get reassigned to X1 or is there another step?&nbsp; Btw - all blades will be powered&nbsp;down while I do this.&nbsp;</P> Thu, 19 Jan 2017 21:24:08 GMT Kerry Quillen 2017-01-19T21:24:08Z https://community.hpe.com/t5/bladesystem-general/stacking-links-question/m-p/6933574#M30055 <P>I'm in the process of importing several enclosures into Oneview.&nbsp; Prior to importing I want to make all of the VC uplinks identical.&nbsp; May be important to mention that all of my enclosures are their own VC domain - no enclosures linked together.&nbsp; One enclosure has VC ports X1 connected to our iscsi network.&nbsp; I need to move that to ports X8 so it matches all of the others enclosures.&nbsp; First I assume I will need to delete the iscsi uplink?&nbsp; Then&nbsp;just move the cable and recreate the uplink?&nbsp; X8 is currently assign as &nbsp;a Stacking Link.&nbsp; Will that automatically get reassigned to X1 or is there another step?&nbsp; Btw - all blades will be powered&nbsp;down while I do this.&nbsp;</P> Thu, 19 Jan 2017 21:24:08 GMT https://community.hpe.com/t5/bladesystem-general/stacking-links-question/m-p/6933574#M30055 Kerry Quillen 2017-01-19T21:24:08Z