https://community.hpe.com/t5/bladesystem-general/lom-mappings/m-p/6970215#M30170 <P>Hello Guys !&nbsp;</P><P>A quick question related to one of our setup. &nbsp;</P><P>Server is 460 Gen 8&nbsp;</P><P>Currently : LOM1 and LOM2 are mapped to Bay1 Flex10 and Bay2 Flex10. &nbsp; Mezzanine card is mapped to Bay 5. &nbsp;</P><P>The above is by design.&nbsp;</P><P>Issue : &nbsp;If both LOM's go faulty, everything is stopped.&nbsp;</P><P>Future : Is this possible &gt;&nbsp;</P><P>LOM1 &gt; Maps to Bay 1&nbsp;</P><P>LOM2 &gt; Maps to Bay 5 (and not Bay 2)</P><P>Mezz &gt; Maps to Bay 7&nbsp;</P><P><BR />Basically, we are looking for -&nbsp;</P><P>Blade NIC1 (4 vNIC) &nbsp;= Maps to Bay 1&nbsp;</P><P>Blade NIC2 ( 4 vNIC) = &nbsp;Maps to Bay5&nbsp;</P><P>Blade Mezz Nic &nbsp;= Maps to Bay7 &nbsp;</P><P>Does this makes sense ?&nbsp;</P><P>WIth the above, even if LOM1 port goes bad, it would still have mezzanine to connect.&nbsp;</P> Fri, 07 Jul 2017 08:16:03 GMT grinningdevil 2017-07-07T08:16:03Z https://community.hpe.com/t5/bladesystem-general/lom-mappings/m-p/6970215#M30170 <P>Hello Guys !&nbsp;</P><P>A quick question related to one of our setup. &nbsp;</P><P>Server is 460 Gen 8&nbsp;</P><P>Currently : LOM1 and LOM2 are mapped to Bay1 Flex10 and Bay2 Flex10. &nbsp; Mezzanine card is mapped to Bay 5. &nbsp;</P><P>The above is by design.&nbsp;</P><P>Issue : &nbsp;If both LOM's go faulty, everything is stopped.&nbsp;</P><P>Future : Is this possible &gt;&nbsp;</P><P>LOM1 &gt; Maps to Bay 1&nbsp;</P><P>LOM2 &gt; Maps to Bay 5 (and not Bay 2)</P><P>Mezz &gt; Maps to Bay 7&nbsp;</P><P><BR />Basically, we are looking for -&nbsp;</P><P>Blade NIC1 (4 vNIC) &nbsp;= Maps to Bay 1&nbsp;</P><P>Blade NIC2 ( 4 vNIC) = &nbsp;Maps to Bay5&nbsp;</P><P>Blade Mezz Nic &nbsp;= Maps to Bay7 &nbsp;</P><P>Does this makes sense ?&nbsp;</P><P>WIth the above, even if LOM1 port goes bad, it would still have mezzanine to connect.&nbsp;</P> Fri, 07 Jul 2017 08:16:03 GMT https://community.hpe.com/t5/bladesystem-general/lom-mappings/m-p/6970215#M30170 grinningdevil 2017-07-07T08:16:03Z https://community.hpe.com/t5/bladesystem-general/lom-mappings/m-p/6970236#M30171 all connections to the interconnect bays are hard wired.<BR /><BR />&gt;&gt; Issue : If both LOM's go faulty<BR /><BR />this is not a single failure, however, consider clustered systems for more redundancy. Fri, 07 Jul 2017 12:21:20 GMT https://community.hpe.com/t5/bladesystem-general/lom-mappings/m-p/6970236#M30171 Torsten. 2017-07-07T12:21:20Z