Hp c7000 VC flex - Active/Active Shared uplink- FAilover testing

Aman1 — Tue, 22 Aug 2017 22:56:28 GMT

Hi,

I have created shared uplink sets named VC_A and VC_B. VC_A is connected to port 1.1 on switch A and VC_B is connected to port 2,1 on switch B and both are in seperate lacp. Both are showing as linkes Active on Virtual connect.

But while testign failover. When i disconnect VC_B , traffic keeps flowing through VC_A without any issues.

But as soon as i disconnect VC_A cable, traffic stops and network goes down., I have enable smart link and made sure that fast cache option is disabled in advance settings as well.

Please suggest, i can share more details if required.

Re: Hp c7000 VC flex - Active/Active Shared uplink- FAilover testing

Torsten. — Wed, 23 Aug 2017 16:02:44 GMT

I did not work with virtual connect for a long time, so I may be wrong.

But AFAIR the ports of both modules need to be in a single set for failover.

topic Re: Hp c7000 VC flex - Active/Active Shared uplink- FAilover testing in BladeSystem - General

Hp c7000 VC flex - Active/Active Shared uplink- FAilover testing

Re: Hp c7000 VC flex - Active/Active Shared uplink- FAilover testing