https://community.hpe.com/t5/bladesystem-general/adding-vnets-via-command-line/m-p/6675901#M30341 <P><STRONG>Mike had a customer question regarding adding vNets to server profiles:</STRONG></P> <P>&nbsp;</P> <P>********</P> <P>&nbsp;</P> <P>I have a customer who has a continually changing environment and is looking for a quicker way to add vNets to the profiles. Can they script this via the OA? If so could how is this done. At the moment they are adding vNets by editing the profiles but they are not rebooting the blades</P> <P>&nbsp;</P> <P>************</P> <P>&nbsp;</P> <P><STRONG>Reply from Fred:</STRONG></P> <P>&nbsp;</P> <P>***********</P> <P>&nbsp;</P> <P>This should be scriptable via the VCMCLI. <A href="http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04383986" target="_blank">http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04383986</A></P> <P>&nbsp;</P> <P>**********</P> <P>&nbsp;</P> <P><STRONG>Comments?</STRONG></P> <P>&nbsp;</P> Thu, 20 Nov 2014 17:29:45 GMT chuckk281 2014-11-20T17:29:45Z https://community.hpe.com/t5/bladesystem-general/adding-vnets-via-command-line/m-p/6675901#M30341 <P><STRONG>Mike had a customer question regarding adding vNets to server profiles:</STRONG></P> <P>&nbsp;</P> <P>********</P> <P>&nbsp;</P> <P>I have a customer who has a continually changing environment and is looking for a quicker way to add vNets to the profiles. Can they script this via the OA? If so could how is this done. At the moment they are adding vNets by editing the profiles but they are not rebooting the blades</P> <P>&nbsp;</P> <P>************</P> <P>&nbsp;</P> <P><STRONG>Reply from Fred:</STRONG></P> <P>&nbsp;</P> <P>***********</P> <P>&nbsp;</P> <P>This should be scriptable via the VCMCLI. <A href="http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04383986" target="_blank">http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c04383986</A></P> <P>&nbsp;</P> <P>**********</P> <P>&nbsp;</P> <P><STRONG>Comments?</STRONG></P> <P>&nbsp;</P> Thu, 20 Nov 2014 17:29:45 GMT https://community.hpe.com/t5/bladesystem-general/adding-vnets-via-command-line/m-p/6675901#M30341 chuckk281 2014-11-20T17:29:45Z