Max. distance between c7000 eclosure's when stacking?

rrzatc — Fri, 28 Nov 2014 11:22:10 GMT

Hi all,

does anybody know the max distance between two c7000 enclosures wihtin a VC domain?

I got two enclosure approx. a half mile away from each other. I want to stack them into a single domain to seperate east-west traffic from the core switches.

Thanks for your help!

lenny

Re: Max. distance between c7000 eclosure's when stacking?

TVVJ — Mon, 01 Dec 2014 10:31:58 GMT

For longer distances as stated above, it is recommended to use optical fibre cable for stacking.

For the following Virtual Connect modules this would be possible. Review Related Options > Cabling and Transceiver Options > "Ethernet Optical Transceivers" in their respective QuickSpecs for part number for transceivers:

HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem

http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04163759

HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem

http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04154336

HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem

http://www8.hp.com/h20195/v2/gethtml.aspx?docname=c04329994

HP Virtual Connect FlexFabric 10Gb/24-Port Module

http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04154400

For HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem, the connectivity is only upto a maximum of 300m. Refer it's QuickSpecs.

HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem does not support stacking as this lacks the computing resources.

For shorter distances the following would be sufficient:

VC-Enet modules support 0.5 m to 7 m (1.64 ft to 23.00 ft) 10GBASE-CX4 stacking cables. The 1000BASE-T links can also be used as stacking links of up to 100 m (328 ft). Ports with different connector types can be aggregated if the link speed is the same. For example, CX4 and SFP+ ports both running at 10G can be aggregated to provide enhanced throughput for the stacking link.

FlexFabric modules support DAC cables. Uplink ports X1-X4 only support 0.5 m to 5m (1.64 ft to 16.40 ft) DAC stacking or uplink cables. Uplink Ports X5-X8 support 0.5 m to 7 m (1.64 ft to 23.00 ft) DAC stacking or uplink cables.

Regards,

Vijay

Re: Max. distance between c7000 eclosure's when stacking?

rrzatc — Mon, 01 Dec 2014 10:36:07 GMT

Thank Vijay, this is totally I was looking for...

topic Max. distance between c7000 eclosure's when stacking? in BladeSystem - General

Max. distance between c7000 eclosure's when stacking?

Re: Max. distance between c7000 eclosure's when stacking?

Re: Max. distance between c7000 eclosure's when stacking?