https://community.hpe.com/t5/bladesystem-general/virtual-connect-manager-nic-mapping/m-p/6745195#M30526 <P>Solved this by accident....</P><P>&nbsp;</P><P>It adds the mezz cards in lines 3-6 then the rest of the flex adapters from 7 onwards. Working as expected now</P> Sat, 16 May 2015 15:51:56 GMT Philsys 2015-05-16T15:51:56Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-manager-nic-mapping/m-p/6744901#M30525 <P>I have a c7000 enclosure witn 8 x BL460c Gen8 blades, 2 VC Flex 10/10D in interconnect slots 1 &amp; 2 and 4 x 6120XG blade switches in interconnect slots 3-6.</P><P>&nbsp;</P><P>I want to create 4 virtual NIC's under the VC fabric adapters and present to each of my blades. In Virtual Connect Manager I can create my domain, networks etc but when I create a server profile and add the networks it maps network 3 and above on the list to the mezz 3 &amp; 4 cards. I want these to be VC NIC's, what am I doing wrong? See screen shot attached, I want to make the mappings highlighted in red Flex Nics on Lom 1 b and Lom 2 b</P><P>&nbsp;</P><P>&nbsp;</P> Fri, 15 May 2015 13:20:38 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-manager-nic-mapping/m-p/6744901#M30525 Philsys 2015-05-15T13:20:38Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-manager-nic-mapping/m-p/6745195#M30526 <P>Solved this by accident....</P><P>&nbsp;</P><P>It adds the mezz cards in lines 3-6 then the rest of the flex adapters from 7 onwards. Working as expected now</P> Sat, 16 May 2015 15:51:56 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-manager-nic-mapping/m-p/6745195#M30526 Philsys 2015-05-16T15:51:56Z