https://community.hpe.com/t5/bladesystem-general/hp-1-10gb-f-vc-enet-modules-stacking-links-connection-status/m-p/6771724#M30619 <P>Hi,</P><P>I have 4 HP 1/10Gb-F VC-Enet Modules and as soon as I create a domain I get a critical error on stacking links connection status failed and Redundancy Status: No Redundancy. Attached you can find more info. I've looked up a previous thread that declaires that cx4 inteconnect cables should be used but on the specs of my modules I can't find such info. What should I do in order to have this condition fixed?</P> Tue, 04 Aug 2015 11:50:19 GMT Konstantinos Stamboulid 2015-08-04T11:50:19Z https://community.hpe.com/t5/bladesystem-general/hp-1-10gb-f-vc-enet-modules-stacking-links-connection-status/m-p/6771724#M30619 <P>Hi,</P><P>I have 4 HP 1/10Gb-F VC-Enet Modules and as soon as I create a domain I get a critical error on stacking links connection status failed and Redundancy Status: No Redundancy. Attached you can find more info. I've looked up a previous thread that declaires that cx4 inteconnect cables should be used but on the specs of my modules I can't find such info. What should I do in order to have this condition fixed?</P> Tue, 04 Aug 2015 11:50:19 GMT https://community.hpe.com/t5/bladesystem-general/hp-1-10gb-f-vc-enet-modules-stacking-links-connection-status/m-p/6771724#M30619 Konstantinos Stamboulid 2015-08-04T11:50:19Z https://community.hpe.com/t5/bladesystem-general/hp-1-10gb-f-vc-enet-modules-stacking-links-connection-status/m-p/6771734#M30620 <P>Interconnect Bays Info attached</P> Tue, 04 Aug 2015 12:02:07 GMT https://community.hpe.com/t5/bladesystem-general/hp-1-10gb-f-vc-enet-modules-stacking-links-connection-status/m-p/6771734#M30620 Konstantinos Stamboulid 2015-08-04T12:02:07Z