https://community.hpe.com/t5/bladesystem-general/promiscuous-mode-with-flex-10/m-p/6342447#M30718 <P>Hello. I am attempting to setup Websense using VMWare on the C7000 with Flex-10s. I have done this with VMware before and I am confident in that configuration, but I am not seeing any traffic when running on this hardware. I have a copper SFP in each Flex-10 connected to a mirror port on each of my E5406 switches. Can anyone offer any input on why I can not see any traffic? If I plug my laptop into this port, I can see the traffic in both directions. Thanks!</P> Mon, 20 Jan 2014 14:24:22 GMT FMLNetworkAdmin 2014-01-20T14:24:22Z https://community.hpe.com/t5/bladesystem-general/promiscuous-mode-with-flex-10/m-p/6342447#M30718 <P>Hello. I am attempting to setup Websense using VMWare on the C7000 with Flex-10s. I have done this with VMware before and I am confident in that configuration, but I am not seeing any traffic when running on this hardware. I have a copper SFP in each Flex-10 connected to a mirror port on each of my E5406 switches. Can anyone offer any input on why I can not see any traffic? If I plug my laptop into this port, I can see the traffic in both directions. Thanks!</P> Mon, 20 Jan 2014 14:24:22 GMT https://community.hpe.com/t5/bladesystem-general/promiscuous-mode-with-flex-10/m-p/6342447#M30718 FMLNetworkAdmin 2014-01-20T14:24:22Z