topic Re: Virtual Connect with Radius NPS in BladeSystem - General

Virtual Connect with Radius NPS

Jyce — Mon, 04 Aug 2014 10:04:28 GMT

Hi,

I'm trying to configure to authenticate against Radius (NPS on Windows 2012 R2).

I did configured the Vendor Specific attribute (I did the same configuration as this one: http://terenceluk.blogspot.ch/2013/02/setting-up-hp-virtual-connect-manager.html)

Unfortunately, once authenticated, my user doesn't have Administrator rights.

Any ideas where I should look to see what the issue is ?

Thanks & Best Regards,

Jean-Christophe

Jyce — Mon, 04 Aug 2014 13:32:25 GMT

Hi again,

Just installed Wireshark on the server to analyse the traffic flow and the NPS Server is answering correctly (First screenshot).

Second screenshot show that the same group is configured on the Virtual Connect.

By the way, I'm running Firmware Version: 3.51

Thanks & Best Regards,

Jean-Christophe

Jyce — Mon, 04 Aug 2014 13:55:05 GMT

Hi again, again ...

I checked the Access-Request Paquet on the NPS Server and I'm seeing that the Service-Type is 'Authenticate-Only'.

If I understand correctly, this means that only Authentication is performed but no Authorisation ?

Does anyone has an idea where I should look at ?

Thanks & Best Regards,

Jean-Christophe.