topic Re: Multi-Enclosure Firmware Upgrade Process in BladeSystem - General

Multi-Enclosure Firmware Upgrade Process

Matt Sebel — Tue, 25 Sep 2012 20:44:48 GMT

I've been researching all of the different HP docs on the firmware upgrade processes available when upgrading the hardware in the c7000 chassis. I've downloaded the latest HP SPP/SUM and pointed it against a single test chassis and everything went quite smooth. Now, we're at the point where we'd like to run this against our multi-enclosure domain that has 3 chassis in it and each chassis has 2 10Gb VC-Eth modules.

From some of the docs, it appears that HP is still recommending upgrading the OA's using SUM and then using the VCSU to do the VC modules, but has anyone tried successfully just to use SUM to do the whole thing all at once via the GUI? Is this even possible?

Re: Multi-Enclosure Firmware Upgrade Process

Psychonaut — Tue, 25 Sep 2012 21:33:54 GMT

It is possible, I've tested it in a test domain with two chassis with FlexFabric. Since that test I've used VCSU for all my upgrades - for three reasons; the first is to do a healthcheck to verify the domain health (yes you can do before using SUM); the second is because I am using VCEM and the third/most important reason is that VC really is the heart of my chassis and it isn't worth the risk (which I feel is small).

So while it is technically possible - why take the risk? Running VCSU is really easy; just keep using it.

Re: Multi-Enclosure Firmware Upgrade Process

Matt Sebel — Wed, 26 Sep 2012 13:38:45 GMT

I think I will stick with the VCSU then as that seems to be the preferred way.

How are you handling the OA and iLO upgrades? Are you using SUM to take care of those or have you done some scripting of that as well?

Re: Multi-Enclosure Firmware Upgrade Process

Psychonaut — Wed, 26 Sep 2012 16:00:49 GMT

SUM, we are looking at getting an actually a SUM server running (just been loading it locally so far and running it that way). Have you seen the Firmware Management options in 3.60, if not check it out.

HP Firmware,Drivers,iLo Upgrade using HPSUM Command line

Maxnj — Fri, 07 Dec 2012 00:43:08 GMT

Is that possible to upgrade all HP servers's Firmware,Drivers & ILO same time using HPSUM Command line?

Re: HP Firmware,Drivers,iLo Upgrade using HPSUM Command line

Torsten. — Fri, 07 Dec 2012 07:14:26 GMT

It depends.

Some firmware can only be updated in offline mode, drivers can only be updated in online mode.

Re: HP Firmware,Drivers,iLo Upgrade using HPSUM Command line

Maxnj — Sat, 08 Dec 2012 00:43:16 GMT

My question is related to all servers in the environment . Doesn't matter all firmware or few....

Re: Multi-Enclosure Firmware Upgrade Process

Maxnj — Sat, 08 Dec 2012 00:45:53 GMT

Have you try to upgrade OA and iLo using scripting?