https://community.hpe.com/t5/bladesystem-general/virtual-connect-flex10-direct-connect-to-netapp-filer-device/m-p/5526829#M32067 <P>Flex-10 is a pure ethernet module so you can NOT connect to any SAN storage array or switch.</P><P>&nbsp;</P><P>FlexFabric can be configured to connect to uplink SAN FC switch but not stroage array directly.</P> Thu, 02 Feb 2012 18:31:41 GMT Hongjun Ma 2012-02-02T18:31:41Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-flex10-direct-connect-to-netapp-filer-device/m-p/5526467#M32066 <P>&nbsp;</P><P>I need to know if you can directly connect a Virtual Connect Flex10 Blade Interconnect to a Netapp Filer SAN (or any other storage for that matter).&nbsp; The Flex10 switch has the SFP-SR connection (10Gb fibre) - patching directly into the FC port on the NetApp.&nbsp; The NetApp has trunked ports set with LACP.</P><P>&nbsp;</P><P>Please put me out of my misery!&nbsp; Thanks in advance!</P><P>&nbsp;</P><P>T</P> Thu, 02 Feb 2012 13:34:44 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-flex10-direct-connect-to-netapp-filer-device/m-p/5526467#M32066 AstonT 2012-02-02T13:34:44Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-flex10-direct-connect-to-netapp-filer-device/m-p/5526829#M32067 <P>Flex-10 is a pure ethernet module so you can NOT connect to any SAN storage array or switch.</P><P>&nbsp;</P><P>FlexFabric can be configured to connect to uplink SAN FC switch but not stroage array directly.</P> Thu, 02 Feb 2012 18:31:41 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-flex10-direct-connect-to-netapp-filer-device/m-p/5526829#M32067 Hongjun Ma 2012-02-02T18:31:41Z