topic VC + Centos 6 = DCBX Error? in BladeSystem - General

VC + Centos 6 = DCBX Error?

Patrick Neuner — Mon, 23 Apr 2012 12:45:23 GMT

Hi there,

we are just in the process of migrating our stuff to a new C7000 + Virtual Connect. OS = Centos 6 (RHEL)

But we get lot's of those Errors in our message Log:

Apr 22 20:14:27 bl3 kernel: [bnx2x_dcbnl_set_dcbx:2285(eth1)]Requested DCBX mode 5 is beyond advertised capabilities
Apr 22 20:14:27 bl3 kernel: [bnx2x_dcbnl_set_dcbx:2285(eth0)]Requested DCBX mode 5 is beyond advertised capabilities

Already googled / searched the boards for this type of Error - but had no luck with it. I hope someone can enlight me on this?

Thank you

Andreas

Re: VC + Centos 6 = DCBX Error?

Hongjun Ma — Mon, 23 Apr 2012 18:32:21 GMT

what's your VC firmware version and NIC firmware/driver version from ethtool –i eth0 and modinfo bnx2x?

Re: VC + Centos 6 = DCBX Error?

Patrick Neuner — Tue, 24 Apr 2012 09:33:29 GMT

VC firmware: 3.51 2011-12-23T10:01:14Z

ethtool -i eth0
driver: bnx2x
version: 1.70.00-0
firmware-version: bc 6.2.10 phy baa0.105
bus-info: 0000:02:00.0

modinfo bnx2x
filename:       /lib/modules/2.6.32-220.13.1.el6.x86_64/kernel/drivers/net/bnx2x/bnx2x.ko
firmware:       bnx2x/bnx2x-e2-7.0.23.0.fw
firmware:       bnx2x/bnx2x-e1h-7.0.23.0.fw
firmware:       bnx2x/bnx2x-e1-7.0.23.0.fw
version:        1.70.00-0
license:        GPL
description:    Broadcom NetXtreme II BCM57710/57711/57711E/57712/57712_MF/57800/57800_MF/57810/57810_MF/57840/57840_MF Driver
author:         Eliezer Tamir
srcversion:     6A5A19EFF0B787AC073CB60
alias:          pci:v000014E4d000016ABsv*sd*bc*sc*i*
alias:          pci:v000014E4d0000168Dsv*sd*bc*sc*i*
alias:          pci:v000014E4d000016AEsv*sd*bc*sc*i*
alias:          pci:v000014E4d0000168Esv*sd*bc*sc*i*
alias:          pci:v000014E4d000016A5sv*sd*bc*sc*i*
alias:          pci:v000014E4d0000168Asv*sd*bc*sc*i*
alias:          pci:v000014E4d00001663sv*sd*bc*sc*i*
alias:          pci:v000014E4d00001662sv*sd*bc*sc*i*
alias:          pci:v000014E4d00001650sv*sd*bc*sc*i*
alias:          pci:v000014E4d0000164Fsv*sd*bc*sc*i*
alias:          pci:v000014E4d0000164Esv*sd*bc*sc*i*
depends:        mdio,libcrc32c
vermagic:       2.6.32-220.13.1.el6.x86_64 SMP mod_unload modversions
parm:           multi_mode: Multi queue mode (0 Disable; 1 Enable (default)) (int)
parm:           num_queues: Number of queues for multi_mode=1 (default is as a number of CPUs) (int)
parm:           disable_tpa: Disable the TPA (LRO) feature (int)
parm:           int_mode: Force interrupt mode other than MSI-X (1 INT#x; 2 MSI) (int)
parm:           dropless_fc: Pause on exhausted host ring (int)
parm:           poll: Use polling (for debug) (int)
parm:           mrrs: Force Max Read Req Size (0..3) (for debug) (int)
parm:           debug: Default debug msglevel (int)

Re: VC + Centos 6 = DCBX Error?

Hongjun Ma — Thu, 26 Apr 2012 07:20:00 GMT

thanks for info.

Is it VC Flex-10 or Flexfabric? Is this a G6 server? what's your server profile configuration for this blade? how many flexNICs did you create?

Re: VC + Centos 6 = DCBX Error?

Hongjun Ma — Thu, 26 Apr 2012 08:33:48 GMT

ok, i saw your profile config from your other post. is it Flex-10 and G6 server?

Re: VC + Centos 6 = DCBX Error?

Patrick Neuner — Thu, 26 Apr 2012 08:53:08 GMT

right - it's Flex-10 and bl490c G6 Blades

Re: VC + Centos 6 = DCBX Error?

Hongjun Ma — Tue, 01 May 2012 07:44:06 GMT

dont' know the reason. want to open a suppose case?