https://community.hpe.com/t5/bladesystem-general/stacking-2-enclosures/m-p/2359235#M33002 You can use any of the uplink ports as stacking links on the Virtual Connect modules. Also see the Multi-Enclosure Stacking Reference Guide. <A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf" rel="nofollow" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf</A> Mon, 28 Feb 2011 16:44:15 GMT chuckk281 2011-02-28T16:44:15Z https://community.hpe.com/t5/bladesystem-general/stacking-2-enclosures/m-p/2358757#M33001 <P>2 c7000 enclosures each with 2 Flex-10 modules.&nbsp; To stack across enclosures I understand we use CX4 connections. Does it matter which port these use or does it have to use X1 from enc0, bay1 to enc1, bay1?</P> Fri, 25 Feb 2011 21:59:45 GMT https://community.hpe.com/t5/bladesystem-general/stacking-2-enclosures/m-p/2358757#M33001 jonb157 2011-02-25T21:59:45Z https://community.hpe.com/t5/bladesystem-general/stacking-2-enclosures/m-p/2359235#M33002 You can use any of the uplink ports as stacking links on the Virtual Connect modules. Also see the Multi-Enclosure Stacking Reference Guide. <A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf" rel="nofollow" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02102153/c02102153.pdf</A> Mon, 28 Feb 2011 16:44:15 GMT https://community.hpe.com/t5/bladesystem-general/stacking-2-enclosures/m-p/2359235#M33002 chuckk281 2011-02-28T16:44:15Z