Unable to get Network Connectivity on Blades using SUS on FlexFabric VC

VIckzz — Mon, 28 Mar 2011 22:46:05 GMT

Hi Guys,

I need help urgently. I'm configuring HP FlexFabric Virtual Connect 10/24 Port Module to allow multiple Networks on C7000 Enclosures. They all seem connected and Link is also Active but still blades cannot communicate outside enclosure.

Here is what we are using to connect.

SUS carrying multiple VLANs
Smart Link

VPC configured on Cisco Nexus 5K Series Switches

I'm not sure and it's quite critical to get it up and running.

Any Idea?

PS: Please bear my question as I'm wersed on HP Enclosures.

Cheers!

Vickz

Re: Unable to get Network Connectivity on Blades using SUS on FlexFabric VC

chuckk281 — Mon, 04 Apr 2011 19:36:38 GMT

I will ask the question. You really don't have a lot of info here. Anything moer you can tell us about the VC Domain profile? Have you looked at the VC for Cisco Nexus5000 white paper?

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02656171/c02656171.pdf

topic Unable to get Network Connectivity on Blades using SUS on FlexFabric VC in BladeSystem - General

Unable to get Network Connectivity on Blades using SUS on FlexFabric VC

Re: Unable to get Network Connectivity on Blades using SUS on FlexFabric VC