Virtual Connect question about VLANs and mapping.

chuckk281 — Mon, 18 Apr 2011 18:51:10 GMT

Ian had a question regarding VLANs:

*******************

Is it possible to configure the following?

- Using Mapped VLAN tags (not Tunneled)

- Multiple Shared Uplink sets

When defining a profile, I would like to map multiple networks to a FlexNIC. Can the multiple networks come from different Shared Uplink sets?

Right now, I have single VLAN’s connected to each FlexNIC on an ESXi blade, would like to add more VLAN’s to the blade from my existing SUS’s.

*********************

Steve replied:

**********************

Yes. Networks can come from other SUS. And yes for having more than 1 VLAN mapped to a FlexNIC. Just ensure you are in mapped mode and this will work fine. You can have up to 28 different networks per FlexNIC VC today. Also, keep in mind that a VC Network can be connected to only 1 FlexNIC on a LOM/Mezz. IE; vNet_10 cannot be connected to LOM:1a and any other LOM:1x FlexNIC.

***************

Comments or suggestions for Ian?

See the Virtual Connect FlexFabric Cookbook for more info:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02616817/c02616817.pdf

topic Virtual Connect question about VLANs and mapping. in BladeSystem - General

Virtual Connect question about VLANs and mapping.