topic Support for 9K Jumbo Ethernet Frames in BladeSystem - General https://community.hpe.com/t5/bladesystem-general/support-for-9k-jumbo-ethernet-frames/m-p/1633#M33151 <P><FONT color="#000000"><STRONG>There has been a lot of discussion around suppor for 9K Jumbo Frames for HP BladeSystem interconnect modules.</STRONG></FONT></P> <P><FONT color="#000000"><STRONG>&nbsp;</STRONG></FONT></P> <P><FONT color="#000000"><STRONG>Paul chimes in:</STRONG></FONT></P> <P>&nbsp;</P> <P><FONT color="#0000ff">****************************************************************************************************************</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">Do you mean that the max frame size supported by HP with the NC532i and NC532m is 4K?&nbsp; IIRC there are other Flex-10 capable NICs with full 9000 byte Jumbo Frame support.&nbsp; Also, IIRC the Flex-10 I/O module supports a full 9000 byte Jumbo Frame MTU.</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">**************************************************************************************************************</FONT></P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Emanuel also replied:</FONT></STRONG></P> <P>&nbsp;</P> <P><FONT color="#0000ff">**********************************************************************************************************</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">The NC550m is Flex-10 capable today and supports 9K frame sizes.</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">***********************************************************************************************************</FONT></P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">What are you using? Do you need 9K Jumbo Frames?</FONT></STRONG></P> Tue, 11 May 2010 17:52:28 GMT chuckk281 2010-05-11T17:52:28Z Support for 9K Jumbo Ethernet Frames https://community.hpe.com/t5/bladesystem-general/support-for-9k-jumbo-ethernet-frames/m-p/1633#M33151 <P><FONT color="#000000"><STRONG>There has been a lot of discussion around suppor for 9K Jumbo Frames for HP BladeSystem interconnect modules.</STRONG></FONT></P> <P><FONT color="#000000"><STRONG>&nbsp;</STRONG></FONT></P> <P><FONT color="#000000"><STRONG>Paul chimes in:</STRONG></FONT></P> <P>&nbsp;</P> <P><FONT color="#0000ff">****************************************************************************************************************</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">Do you mean that the max frame size supported by HP with the NC532i and NC532m is 4K?&nbsp; IIRC there are other Flex-10 capable NICs with full 9000 byte Jumbo Frame support.&nbsp; Also, IIRC the Flex-10 I/O module supports a full 9000 byte Jumbo Frame MTU.</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">**************************************************************************************************************</FONT></P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Emanuel also replied:</FONT></STRONG></P> <P>&nbsp;</P> <P><FONT color="#0000ff">**********************************************************************************************************</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">The NC550m is Flex-10 capable today and supports 9K frame sizes.</FONT></P> <P><FONT color="#0000ff"></FONT></P> <P><FONT color="#0000ff">***********************************************************************************************************</FONT></P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">What are you using? Do you need 9K Jumbo Frames?</FONT></STRONG></P> Tue, 11 May 2010 17:52:28 GMT https://community.hpe.com/t5/bladesystem-general/support-for-9k-jumbo-ethernet-frames/m-p/1633#M33151 chuckk281 2010-05-11T17:52:28Z