https://community.hpe.com/t5/bladesystem-general/presented-virtual-disks-not-present-in-os/m-p/1159140#M33220 <P>Hello everyone:</P><P>&nbsp;</P><P>I am not a blade expert, but I have a c7000 blade system with 2 hp hsv200-a controllers and 2 storageworks disk arrays.</P><P>&nbsp;</P><P>When I log into the command view and check all the settings, everything is ok.</P><P>&nbsp;</P><P>Controllers are ok, disks are ok, etc, etc</P><P>&nbsp;</P><P>There are 2 Vdisks currently presented to the same Windows 2003 blade server and they look ok in command view as well, but the drives are not viewable on the blade.</P><P>&nbsp;</P><P>If someone could point me in the right direction, that would be greatly appreciated.</P><P>&nbsp;</P><P>tx</P><P>&nbsp;</P><P>Wil</P> Fri, 23 Jul 2010 20:52:42 GMT Wil_McGilvery 2010-07-23T20:52:42Z https://community.hpe.com/t5/bladesystem-general/presented-virtual-disks-not-present-in-os/m-p/1159140#M33220 <P>Hello everyone:</P><P>&nbsp;</P><P>I am not a blade expert, but I have a c7000 blade system with 2 hp hsv200-a controllers and 2 storageworks disk arrays.</P><P>&nbsp;</P><P>When I log into the command view and check all the settings, everything is ok.</P><P>&nbsp;</P><P>Controllers are ok, disks are ok, etc, etc</P><P>&nbsp;</P><P>There are 2 Vdisks currently presented to the same Windows 2003 blade server and they look ok in command view as well, but the drives are not viewable on the blade.</P><P>&nbsp;</P><P>If someone could point me in the right direction, that would be greatly appreciated.</P><P>&nbsp;</P><P>tx</P><P>&nbsp;</P><P>Wil</P> Fri, 23 Jul 2010 20:52:42 GMT https://community.hpe.com/t5/bladesystem-general/presented-virtual-disks-not-present-in-os/m-p/1159140#M33220 Wil_McGilvery 2010-07-23T20:52:42Z