https://community.hpe.com/t5/bladesystem-general/questions-on-latest-virtual-connect-functionality/m-p/2303494#M33333 <P><STRONG><FONT color="#000000">Nick had some questions on the latest Virtual Connect functionality:</FONT></STRONG></P> <P>&nbsp;</P> <P>**********************</P> <P>&nbsp;</P> <P>Hi All,</P> <P>&nbsp;</P> <P>A quick question on the latest functionality of Virtual Connect if I may.</P> <P>&nbsp;</P> <UL> <LI>Are we still restricted to active/standby if a VC network (SUS or dedicated) has cables in 2 different modules?</LI> </UL> <P>***********************************</P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Adam replied:</FONT></STRONG></P> <P>&nbsp;</P> <P>*************************</P> <P>&nbsp;</P> <P>Yes we are restricted, however there is a simple configuration to get around the problem.</P> <P>&nbsp;</P> <P><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf" rel="nofollow" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf</A></P> <P>&nbsp;</P> <P>See scenario 1:2 in the VC cookbook (page 28 is the one you want).</P> <P>&nbsp;</P> <P>****************************</P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Hope that helps. Other comments?</FONT></STRONG></P> Tue, 05 Oct 2010 13:55:38 GMT chuckk281 2010-10-05T13:55:38Z https://community.hpe.com/t5/bladesystem-general/questions-on-latest-virtual-connect-functionality/m-p/2303494#M33333 <P><STRONG><FONT color="#000000">Nick had some questions on the latest Virtual Connect functionality:</FONT></STRONG></P> <P>&nbsp;</P> <P>**********************</P> <P>&nbsp;</P> <P>Hi All,</P> <P>&nbsp;</P> <P>A quick question on the latest functionality of Virtual Connect if I may.</P> <P>&nbsp;</P> <UL> <LI>Are we still restricted to active/standby if a VC network (SUS or dedicated) has cables in 2 different modules?</LI> </UL> <P>***********************************</P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Adam replied:</FONT></STRONG></P> <P>&nbsp;</P> <P>*************************</P> <P>&nbsp;</P> <P>Yes we are restricted, however there is a simple configuration to get around the problem.</P> <P>&nbsp;</P> <P><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf" rel="nofollow" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf</A></P> <P>&nbsp;</P> <P>See scenario 1:2 in the VC cookbook (page 28 is the one you want).</P> <P>&nbsp;</P> <P>****************************</P> <P>&nbsp;</P> <P><STRONG><FONT color="#000000">Hope that helps. Other comments?</FONT></STRONG></P> Tue, 05 Oct 2010 13:55:38 GMT https://community.hpe.com/t5/bladesystem-general/questions-on-latest-virtual-connect-functionality/m-p/2303494#M33333 chuckk281 2010-10-05T13:55:38Z