https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/968#M33660 Hi All, If I use the 2 inner stacking ports for interconnecting VC Modules at Bay1 and Bay2, can I still be able to use uplink port X7 and X8 at the same time ? If yes will the backplane/traffic gets shared ? Best Regards Tue, 28 Jul 2009 10:49:00 GMT Necati Cehreli 2009-07-28T10:49:00Z https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/968#M33660 Hi All, If I use the 2 inner stacking ports for interconnecting VC Modules at Bay1 and Bay2, can I still be able to use uplink port X7 and X8 at the same time ? If yes will the backplane/traffic gets shared ? Best Regards Tue, 28 Jul 2009 10:49:00 GMT https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/968#M33660 Necati Cehreli 2009-07-28T10:49:00Z https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/969#M33661 Hi, no - ports are shared, so if you plug in a SFP or cable the crosslink isn't available anymore. Ports are also marked as "SHARED: UPLINK or X-LINK" Cheers Markus Tue, 28 Jul 2009 14:22:00 GMT https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/969#M33661 Markus Liebl 2009-07-28T14:22:00Z https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/970#M33662 Thanks Markus Tue, 28 Jul 2009 15:41:00 GMT https://community.hpe.com/t5/bladesystem-general/hp-vc-flex-10-inner-midplane-stack/m-p/970#M33662 Necati Cehreli 2009-07-28T15:41:00Z