topic Re: bl460c powerup issue in BladeSystem - General

bl460c powerup issue

binoyskylark — Fri, 18 Jul 2008 13:53:51 GMT

hi we are having blade c7000 enclosure with 7 blades , one blade hanging frequently and not able to access the operating system . i switch off the server using ilo power button . but its not powering on again , giving amber light in network and powerbutton. after some time i switched it on again that time its worked . its happend in 2 times , any suspect or suggest in hardware .

Re: bl460c powerup issue

James ~ Happy Dude — Fri, 18 Jul 2008 14:08:00 GMT

Hello,
Anything in the Logs ?
If not, you could run a diagnostics & check for errors.

Regards,

Re: bl460c powerup issue

binoyskylark — Fri, 18 Jul 2008 14:22:35 GMT

no error in system event , no error in IML , any chance for a memory/system board issue

Re: bl460c powerup issue

James ~ Happy Dude — Fri, 18 Jul 2008 14:33:26 GMT

Do you get anything in the Insight display ? OA logs ? anywhere ???
I am sure, there must have been an event captured.

Regards,

Re: bl460c powerup issue

bryanVF — Fri, 18 Jul 2008 23:53:11 GMT

that is the same issue that happens on old firmware versions for iLo if you updated it to FW 1.50 and the OA to fw 2.21 issue will be gone.

That is a known issue.

hope this help you.

Let me know.

best regards

Re: bl460c powerup issue

binoyskylark — Sat, 19 Jul 2008 03:19:20 GMT

hanging of server is also happening becuase of old firmware