https://community.hpe.com/t5/bladesystem-general/flex-10-interconnect-issue/m-p/1130003#M33829 I have a C7000 with Flex 10 and a Procurve 6600 TOR switch.<BR /> <BR /> I can't seem to connect the Flex 10 module to the 6600 via 10G SFP+ (same cable and transceivers (J9150A) work in other devices). <BR /> <BR /> Do I have use the Flex 10 approved SFP+s and if so will I get an issue with Procurve SFP+ at the other end?<BR /> <BR /> Anyone had any experience with these? Fri, 08 Jan 2010 01:38:23 GMT Ken Hollywood 2010-01-08T01:38:23Z https://community.hpe.com/t5/bladesystem-general/flex-10-interconnect-issue/m-p/1130003#M33829 I have a C7000 with Flex 10 and a Procurve 6600 TOR switch.<BR /> <BR /> I can't seem to connect the Flex 10 module to the 6600 via 10G SFP+ (same cable and transceivers (J9150A) work in other devices). <BR /> <BR /> Do I have use the Flex 10 approved SFP+s and if so will I get an issue with Procurve SFP+ at the other end?<BR /> <BR /> Anyone had any experience with these? Fri, 08 Jan 2010 01:38:23 GMT https://community.hpe.com/t5/bladesystem-general/flex-10-interconnect-issue/m-p/1130003#M33829 Ken Hollywood 2010-01-08T01:38:23Z