https://community.hpe.com/t5/bladesystem-general/bl680c-g5-virtual-connect-problems/m-p/1131361#M33832 UPDATE:<BR /><BR />Hi,<BR />It seems that the incorrect MAC addresses are only been given for a NC360m mezzanine card, all the onboard NICs are working correctly with virtual connect.<BR /><BR />Are there any know problems with NC260M cards?<BR /><BR />thanks Mon, 18 Jan 2010 11:38:48 GMT D O'Callaghan 2010-01-18T11:38:48Z https://community.hpe.com/t5/bladesystem-general/bl680c-g5-virtual-connect-problems/m-p/1131360#M33831 Hi<BR /> I have a BL680C G5 running RHEL 5.4.<BR /> <BR /> The virtual connect is set to deliver 6 NICs with assigned MAC.<BR /> <BR /> I'm only getting 4 of the Virtual MAC address assigned, the other two NIC seem to have the real MAC of the NICs. <BR /> <BR /> Anyone know why this would happen?<BR /> <BR /> I have RHEL 5.4 installed. I have not installed any of the Prolient support and prefer not to but if anyone knows if a part of the support will solve this problem, please, let me know.<BR /> <BR /> Thanks. Fri, 15 Jan 2010 12:50:31 GMT https://community.hpe.com/t5/bladesystem-general/bl680c-g5-virtual-connect-problems/m-p/1131360#M33831 D O'Callaghan 2010-01-15T12:50:31Z https://community.hpe.com/t5/bladesystem-general/bl680c-g5-virtual-connect-problems/m-p/1131361#M33832 UPDATE:<BR /><BR />Hi,<BR />It seems that the incorrect MAC addresses are only been given for a NC360m mezzanine card, all the onboard NICs are working correctly with virtual connect.<BR /><BR />Are there any know problems with NC260M cards?<BR /><BR />thanks Mon, 18 Jan 2010 11:38:48 GMT https://community.hpe.com/t5/bladesystem-general/bl680c-g5-virtual-connect-problems/m-p/1131361#M33832 D O'Callaghan 2010-01-18T11:38:48Z