topic C7000 ilo in BladeSystem - General

C7000 ilo

i_onnet — Wed, 16 Aug 2023 08:17:13 GMT

Hi,

I need to enable FIPS on ILO. Once I do that it will reset ILO to default. Is there a way to reconfigure ILO without rebooting the entire c7000 chasis?

Does the ILO defailt settings goes to dhcp and any default credentaion on C7000?

Thank you in advance for any help and responses to query.

Thank You,
Chirag

Re: C7000 ilo

shiva_jr — Wed, 16 Aug 2023 04:46:58 GMT

Hi I_onnet,
You will enable the FIPS on OA "Enclosure settings"
Is there a way to reconfigure ILO without rebooting the entire c7000 chasis? No
To enable FIPS, Virtual connect will be cleared. IF we take the backup of VC in Non-FIPS mode, we cannot restore it in FIPS enabled mode. So you need to reconfigure the VC manually after FIPS enabled.
Does the ILO defailt settings goes to dhcp and any default credentaion on C7000? Yes, The OA IP address will be reset to DHCP, you need to make note of static IP address before the FIPS, if any. Reconfigure it using OS display panel.

For more information, please refer this document, page no. 62 and 133.

Regards,
Shiva_JR

Re: C7000 ilo

Sunitha_Mod — Thu, 24 Aug 2023 14:16:04 GMT

Hello @i_onnet,

Let us know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.