BladeSystem c7000 SNMP Setting

Account1 — Fri, 22 Mar 2024 07:56:53 GMT

Hi,

I would like to confirm about BladeSystem c7000 DDR2 Onboard Administrator and HPE Virtual Connect for c-Class BladeSystem 4.85.

Please let me know if the settings made on the primary machine are also reflected on the standby machine.

I have changed the SNMP trap destination on the primary machine and would like to know if this is also reflected on the standby machine.

Also, for the VC for c-Class Bladesystem, is the SNMP test trap sent only from the CLI?

There is no item in the GUI, so please let me check just to be sure.

Best regards,

Re: BladeSystem c7000 SNMP Setting

Rakshitha_K — Thu, 21 Mar 2024 05:03:00 GMT

Hi Account1,

Here I am assuming the 'primary machine' indicates the Blade System c7000.

Yes, the configuration changes made in OA will reflect to all blade systems including the Virtual Connect settings accordingly.

If the Settings or configuration is specific to a blade or VC, then it will be applicable to that component only.

We can configure the SNMP test traps using the Onboard Administrator (OA) GUI.

Regards,
Rakshitha K

Please mark as 'Accepted Solution' and give me 'Kudos' if my post worked.