topic Re: BL 460C does not power up. in BladeSystem - General

BL 460C does not power up.

luongson — Fri, 15 Aug 2008 15:23:16 GMT

Hi all,
I have a enclosure C7000 and used to 10 server BL 460c and the server is power up. Now i has new 6 server and using 6 server BL 460c in to remain 6 blank. But 6 server does not power up, Power led is Green, and Health LED flashing is red ( file attack ). Help me to troubleshooting. Thanks and cooming soon.

Re: BL 460C does not power up.

Raghuarch — Fri, 15 Aug 2008 19:57:40 GMT

What is the OA and iLO version you are Using?
Can you please post Syslog contents of the OA.

What made them to Go into that state did u do a OA firmware update or iLO firmware update or Upgraded the ROM.

Re: BL 460C does not power up.

JKytsi — Sat, 16 Aug 2008 08:58:48 GMT

How many power supplies You have ? And what is Your redundancy for power. Maybe there is not enough power for the new blades ...

Re: BL 460C does not power up.

luongson — Sun, 17 Aug 2008 14:12:40 GMT

Hi all,
I has 6 powers supplies and N+N Redundancy for power, but 3 Server BL 460c in 6 new server is Power LED is Green, and Health LED flashing is red ( file attach ) and does not power up. Do you have documents for troubleshooting ?

Re: BL 460C does not power up.

luongson — Sun, 17 Aug 2008 14:45:02 GMT

and Insight Display device ok, not device error, but has 3 server is power Led in amber, and Health Led flashing is red. Help me to troubleshooting. Thanks and cooming soon !

Re: BL 460C does not power up.

JKytsi — Mon, 18 Aug 2008 08:15:54 GMT

Have You tried the traditional "yank blade out-yank blade in" -method ?

Re: BL 460C does not power up.

Raghuarch — Mon, 18 Aug 2008 13:45:11 GMT

1. Set the Power mode to Power Supply Redundant:
Login to OA CLI: Execute the command
Reset server
once all the blades come up, Chane the Power mode to N+N.

if above doesn't work.

2. Login to VC and Check the Profiles of the 6 servers, are they Properly configured. try to assign the profiles if they are not assigned.
Tty to power on the servers.

Re: BL 460C does not power up.

luongson — Mon, 18 Aug 2008 14:01:24 GMT

Hi all,
I has tried "yank blade out - yank blade in" but server does not power up,
The powers mode N+N and i try again login VC to config the profile of 6 servers, but servers not power up. Do you have documents is Enclosure Troubleshooting Guide ? sent to me. Thanks and cooming soon.

Re: BL 460C does not power up.

JKytsi — Mon, 25 Aug 2008 15:07:27 GMT

Hi,

Here is the link to troubleshooting guide

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01215727/c01215727.pdf

Re: BL 460C does not power up.

luongson — Mon, 25 Aug 2008 15:19:46 GMT

Hi Jarkko K.
Thanks you support for me.