sb40 blade not detecting

Shrinivas C. Kulkarni — Fri, 12 Sep 2008 09:56:19 GMT

I have sb40 blade server after rebooting
atta..server(460c) it not getting detected
if i reboot it twice(only server) it get detected

is there need to down sb40 also ?
i tried rescan option in array config. utility

pls help

Re: sb40 blade not detecting

Phil uk — Fri, 12 Sep 2008 12:21:27 GMT

Hi,

Your symptoms may be due to the following advisory:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01458856&prodTypeId=329290&prodSeriesId=1844065

**Note: If this is your problem then upgrade to the latest firmware, but NOT to 2.20 as in the Advisory as this release has been withdrawn.

You may need to update your iLO F/W before doing the OA F/W.

Regards,
Phil

topic Re: sb40 blade not detecting in BladeSystem - General

sb40 blade not detecting

Re: sb40 blade not detecting