topic "Corrected threshold exceeded" Memory Error on BL460c in BladeSystem - General

"Corrected threshold exceeded" Memory Error on BL460c

Fabietto — Tue, 16 Sep 2008 13:51:16 GMT

Why the following error: Corrected Memory Error threshold exceeded (System Memory, Memory Module 5) countinuously appears even if all memory DIMMS have been replaced??

Thanks a lot,
Fabio

Re: "Corrected threshold exceeded" Memory Error on BL460c

JKytsi — Wed, 17 Sep 2008 05:21:28 GMT

could be a faulty mainboard or a BIOS update needed.

Re: "Corrected threshold exceeded" Memory Error on BL460c

JKytsi — Wed, 17 Sep 2008 07:02:48 GMT

And what is your Proliant support pack version ?

Re: "Corrected threshold exceeded" Memory Error on BL460c

Fabietto — Wed, 17 Sep 2008 08:19:02 GMT

ProLiant support Pack version 8

Re: "Corrected threshold exceeded" Memory Error on BL460c

JKytsi — Wed, 17 Sep 2008 18:18:38 GMT

hmm ... and you have Advanced ECC enabled in BIOS (default setting)

Re: "Corrected threshold exceeded" Memory Error on BL460c

Quality Center: Connect — Mon, 16 Feb 2009 23:12:28 GMT

Are there any updates to this thread?

We are experiencing the same issue on multiple BL460c servers (10% of the blades). We have switched out the DIMMs but with the same "Corrected Memory Error threshold exceeded (System Memory, Memory Module x)".

We have performed blade firmware updates (L15 11/02/2008) which has alleviated our reboot issues but not the RAM error.

Thank you for any help.

Re: "Corrected threshold exceeded" Memory Error on BL460c

Timur S Lukovkin — Fri, 20 Feb 2009 21:09:49 GMT

Have you checked this advisory?

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01591101&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

regards.