topic Re: Blade Teaming problem in BladeSystem - General

Blade Teaming problem

Zeljko Muza — Tue, 23 Sep 2008 11:21:14 GMT

Hi,
I have two installed c7000 Blade Enclosures with 24 Blades. I also have VC Ethernet installed. Problem is when I try to test HP network Team. After I disable one NIC server loses RDP connection. I can ping server but I cannot connect again.

Re: Blade Teaming problem

JKytsi — Tue, 23 Sep 2008 16:16:22 GMT

What's in your VC profile for that server? how many VC ethernet modules You have ?

Re: Blade Teaming problem

Zeljko Muza — Tue, 23 Sep 2008 16:51:53 GMT

I have 2 VC Eth. It is temporary profile.
Is may be problem with DNS name for wach NIC?

Re: Blade Teaming problem

Zeljko Muza — Wed, 24 Sep 2008 06:39:24 GMT

Hi,
I am sending my VC config. My be this helps to see what is a problem.

Re: Blade Teaming problem

Zeljko Muza — Wed, 24 Sep 2008 06:39:53 GMT

Hi,
I am sending my VC config. My be this helps to see what is a problem.

Re: Blade Teaming problem

JKytsi — Wed, 24 Sep 2008 14:01:55 GMT

And what blade You have ? and does it have extra NICs?

Re: Blade Teaming problem

JKytsi — Wed, 24 Sep 2008 14:07:41 GMT

and by RDP you mean rapid deployement pack? only one nic can be used with pxe boot.

Re: Blade Teaming problem

Zeljko Muza — Wed, 24 Sep 2008 19:22:41 GMT

I have BL460c. RDP is Remote Desktop.
no extra NIC only onboard.

Re: Blade Teaming problem

Zeljko Muza — Thu, 25 Sep 2008 07:20:43 GMT

Hi,
I found this error in log.
But I dont know what to do.

Re: Blade Teaming problem

JKytsi — Thu, 25 Sep 2008 15:49:19 GMT

You have four nics specified in the VC profile but in your BL460 you have only two. Remove extra nics from profile and create team from two first