https://community.hpe.com/t5/bladesystem-general/problem-bl25p-init/m-p/4279807#M3987 Problem during initializing on a blade 25 p :<BR /><BR />the post sequence stop after the 2nd processor test and after nothing append it stop, we have change processors, memory, mother board ...<BR />when i put on sw 6 for clear configuration it's working well the config seems ok i can verify the bios and the 6i controller, but when i return to normal position it is th same stop after processor init, i try with only one processor but stop at the first processor, what can 1 do ? Thu, 02 Oct 2008 10:43:31 GMT diaug 2008-10-02T10:43:31Z https://community.hpe.com/t5/bladesystem-general/problem-bl25p-init/m-p/4279807#M3987 Problem during initializing on a blade 25 p :<BR /><BR />the post sequence stop after the 2nd processor test and after nothing append it stop, we have change processors, memory, mother board ...<BR />when i put on sw 6 for clear configuration it's working well the config seems ok i can verify the bios and the 6i controller, but when i return to normal position it is th same stop after processor init, i try with only one processor but stop at the first processor, what can 1 do ? Thu, 02 Oct 2008 10:43:31 GMT https://community.hpe.com/t5/bladesystem-general/problem-bl25p-init/m-p/4279807#M3987 diaug 2008-10-02T10:43:31Z