https://community.hpe.com/t5/bladesystem-general/bl-460c-server-shutdown-linux-command-front-panel-display-red/m-p/4282759#M4031 red led is usually a malfunctioning HW but in your case it could have been a ILO communication issue with OA Wed, 08 Oct 2008 09:31:35 GMT JKytsi 2008-10-08T09:31:35Z https://community.hpe.com/t5/bladesystem-general/bl-460c-server-shutdown-linux-command-front-panel-display-red/m-p/4282758#M4030 we are runing on linux 5.1 with BL460C server Cluster suite. Server shutdown through linux properly. We looked red LED on front panel when we try power switch on the server doesn’t work than removed the server in enclose and reconnected. Server is working find. Please advice red LED Indications Wed, 08 Oct 2008 03:58:32 GMT https://community.hpe.com/t5/bladesystem-general/bl-460c-server-shutdown-linux-command-front-panel-display-red/m-p/4282758#M4030 vncl 2008-10-08T03:58:32Z https://community.hpe.com/t5/bladesystem-general/bl-460c-server-shutdown-linux-command-front-panel-display-red/m-p/4282759#M4031 red led is usually a malfunctioning HW but in your case it could have been a ILO communication issue with OA Wed, 08 Oct 2008 09:31:35 GMT https://community.hpe.com/t5/bladesystem-general/bl-460c-server-shutdown-linux-command-front-panel-display-red/m-p/4282759#M4031 JKytsi 2008-10-08T09:31:35Z