https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289318#M4142 mount the disk before the OS installer starts. And use floppy image. Fri, 17 Oct 2008 19:13:03 GMT JKytsi 2008-10-17T19:13:03Z https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289317#M4141 I'm trying to load a new BL495 with a 10g ethernet card. The drivers aren't included with RH5u2, but there is a driver disk released by HP, <A href="ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p299183725/v48649/bnx2x-1.45.11-rhel5.x86_64.dd.txt" target="_blank">ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p299183725/v48649/bnx2x-1.45.11-rhel5.x86_64.dd.txt</A> . The problem I have is that the 10g is the only card on the blade, so the only way to load this is using the virtual media. The virtual media "mount" doesn't want to recognize the driver disk.<BR /><BR />Any clues?<BR />Thanks!<BR />Mark Fri, 17 Oct 2008 15:46:36 GMT https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289317#M4141 Mark Koenig (ISS SCI) 2008-10-17T15:46:36Z https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289318#M4142 mount the disk before the OS installer starts. And use floppy image. Fri, 17 Oct 2008 19:13:03 GMT https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289318#M4142 JKytsi 2008-10-17T19:13:03Z https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289319#M4143 Much appreciated!<BR />That fixed it...<BR /><BR />Mark Fri, 17 Oct 2008 21:09:54 GMT https://community.hpe.com/t5/bladesystem-general/bl495-loading-rh-5u2/m-p/4289319#M4143 Mark Koenig (ISS SCI) 2008-10-17T21:09:54Z