https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296125#M4252 The port that reports this issue is port 2 on the Brocade, which is an internal port connected to Blade 2.<BR /><BR />I'll clear the stats and see what happens, i just enabled the port again. Wed, 29 Oct 2008 10:05:31 GMT JorisK 2008-10-29T10:05:31Z https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296123#M4250 Hi everyone,<BR /><BR />When logging on to my 2nd Brocade switch i notice all ports have Link failures somewhere around 10/20.<BR /><BR />Now this could be normal i guess... but one of them has about 600.000 link failures!<BR /><BR />What does this mean and what do you all advice?<BR /><BR /> Wed, 29 Oct 2008 08:36:19 GMT https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296123#M4250 JorisK 2008-10-29T08:36:19Z https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296124#M4251 Have you checked that cables are _properly_ attached to switch and servers ?<BR /><BR />clear the error counters from CLI<BR />statsclear Wed, 29 Oct 2008 10:01:58 GMT https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296124#M4251 JKytsi 2008-10-29T10:01:58Z https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296125#M4252 The port that reports this issue is port 2 on the Brocade, which is an internal port connected to Blade 2.<BR /><BR />I'll clear the stats and see what happens, i just enabled the port again. Wed, 29 Oct 2008 10:05:31 GMT https://community.hpe.com/t5/bladesystem-general/brocade-4-12-link-errors/m-p/4296125#M4252 JorisK 2008-10-29T10:05:31Z