https://community.hpe.com/t5/bladesystem-general/issue-with-msa2000-vss-provider/m-p/4297014#M4261 Hello,<BR />since the VSS provider was listed by the "VSS list providers" command but was not in the Windows Add/Remove Programs, I could not remove it.<BR />So I installed the new version (2.4), removed it form ARP (now, it was there), and finally tried again to backup with BackupExec. <BR />This time everything was fine. Thu, 30 Oct 2008 10:00:01 GMT Fabio_S 2008-10-30T10:00:01Z https://community.hpe.com/t5/bladesystem-general/issue-with-msa2000-vss-provider/m-p/4297013#M4260 Hello,<BR />I have 5 BL460 G1 connected to an MSA2000 SAN (FC). They are all running WS2K3 R2 SP2 x64, and I installed the MSA2000 SES Driver (2.3) on all of them.<BR />It seems only one of them has now the HP MSA2000 VSS provider installed, which causes issues with Symantec BackupExec. Other ones have only Microsoft VSS provider and I can backup them normally.<BR />Is there a way to deactivate-remove the HP VSS Provider? Without of course impacting the connection to the SAN (it's a production server...)<BR />thanks! Thu, 30 Oct 2008 09:04:20 GMT https://community.hpe.com/t5/bladesystem-general/issue-with-msa2000-vss-provider/m-p/4297013#M4260 Fabio_S 2008-10-30T09:04:20Z https://community.hpe.com/t5/bladesystem-general/issue-with-msa2000-vss-provider/m-p/4297014#M4261 Hello,<BR />since the VSS provider was listed by the "VSS list providers" command but was not in the Windows Add/Remove Programs, I could not remove it.<BR />So I installed the new version (2.4), removed it form ARP (now, it was there), and finally tried again to backup with BackupExec. <BR />This time everything was fine. Thu, 30 Oct 2008 10:00:01 GMT https://community.hpe.com/t5/bladesystem-general/issue-with-msa2000-vss-provider/m-p/4297014#M4261 Fabio_S 2008-10-30T10:00:01Z