https://community.hpe.com/t5/bladesystem-general/vc-enet-cannot-ping/m-p/4323322#M4632 Hello Forum,<BR /><BR />I have a C7000 with about 7 servers. I also have VC-Enet modules, i configured the VC modules and setup the Vlan ID to 134, I connected the servers to the external network and I am not able to ping or receive ping from any server not inside the enclosure.<BR /><BR />I am not sure about the configuration of the external switch (not the VC) should be configured with trunk? vlan ids ?... Mon, 15 Dec 2008 12:25:18 GMT Jacky Wing 2008-12-15T12:25:18Z https://community.hpe.com/t5/bladesystem-general/vc-enet-cannot-ping/m-p/4323322#M4632 Hello Forum,<BR /><BR />I have a C7000 with about 7 servers. I also have VC-Enet modules, i configured the VC modules and setup the Vlan ID to 134, I connected the servers to the external network and I am not able to ping or receive ping from any server not inside the enclosure.<BR /><BR />I am not sure about the configuration of the external switch (not the VC) should be configured with trunk? vlan ids ?... Mon, 15 Dec 2008 12:25:18 GMT https://community.hpe.com/t5/bladesystem-general/vc-enet-cannot-ping/m-p/4323322#M4632 Jacky Wing 2008-12-15T12:25:18Z https://community.hpe.com/t5/bladesystem-general/vc-enet-cannot-ping/m-p/4323323#M4633 Are you saying that only the c-class blade server NICs are pingable? And that other servers (not blades) on VLAN 134 cannot be pinged? Tue, 16 Dec 2008 19:17:55 GMT https://community.hpe.com/t5/bladesystem-general/vc-enet-cannot-ping/m-p/4323323#M4633 Terri Harris 2008-12-16T19:17:55Z