topic Re: System info/association not showing up correctly on HP SIM in BladeSystem - General

System info/association not showing up correctly on HP SIM

Franck_21 — Mon, 22 Dec 2008 08:44:26 GMT

Good morning,

I have a private collection of servers set. However the association between a given server and its enclosure is lost after a while (until I do a fresh discovery run). The same applies for the association between ilo interfaces and the parent servers.

Thanks

Re: System info/association not showing up correctly on HP SIM

Terri Harris — Mon, 22 Dec 2008 17:08:23 GMT

What is the SIM version? What is the SIM BladeSystem Integrated Manager version?
What is the ilO firmware? And the OA fw?

I'm assuming these are c-class blade enclosures. Also assuming you have set static IP addresses for both the OA modules & the iLO.

Re: System info/association not showing up correctly on HP SIM

Franck_21 — Mon, 22 Dec 2008 17:25:19 GMT

Systems Insight Manager 5.2 with SP2 - Windows

HP BladeSystem Integrated Manager 3.4

HP ProLiant iLO Advanced and Enhanced System Management Controller Driver for Windows Server 2003 5.42.0.0

What do you mean by OA?

Actually it is a p-class enclosure and yes everythning is set as static

Re: System info/association not showing up correctly on HP SIM

Dennis Handly — Thu, 25 Dec 2008 03:30:19 GMT

>What do you mean by OA?

Onboard Administrator

Re: System info/association not showing up correctly on HP SIM

Franck_21 — Fri, 26 Dec 2008 08:40:03 GMT

Do not think we have OA. It seems to appy to c-class enclosures (we have a p-class one)

Re: System info/association not showing up correctly on HP SIM

Jeff Allen_5 — Fri, 02 Jan 2009 04:15:25 GMT

Is SNMP on the blade servers set to allow access from 127.0.0.1 (or localhost)?

Re: System info/association not showing up correctly on HP SIM

Franck_21 — Fri, 02 Jan 2009 08:15:26 GMT

SNMP agents are configured to accept connections from localhost