https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342858#M4918 Do it from interconnect managament console. For example brocade web gui --&gt; switch admin Thu, 22 Jan 2009 18:54:38 GMT JKytsi 2009-01-22T18:54:38Z https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342857#M4917 We have just recently replaced our Microsoft DNS servers with new hardware, names and IP's. We have changed all DNS IPs on all 500+ servers Now I want to change the DNS IP addresss on each Interconnect modules(HP 1:10G Enternet Switch and Brocade 4/24 SAN switch)without affecting I/O. How can this be done? Doing this throught the onboard administrator will reset all interconnect modules. Something I can't afford to let happen. Thu, 22 Jan 2009 13:33:34 GMT https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342857#M4917 Troy Harrell 2009-01-22T13:33:34Z https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342858#M4918 Do it from interconnect managament console. For example brocade web gui --&gt; switch admin Thu, 22 Jan 2009 18:54:38 GMT https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342858#M4918 JKytsi 2009-01-22T18:54:38Z https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342859#M4919 You can access 1:10 Switch by telnet,SSH or console and change the IP:<BR /><BR />/c/l3/dns<BR /> prima x.x.x.x<BR /> secon x.x.x.x<BR />You can also do it from web management.<BR /> Mon, 26 Jan 2009 04:00:49 GMT https://community.hpe.com/t5/bladesystem-general/changing-the-management-ip-ebipa-address-for-interconnect-module/m-p/4342859#M4919 Lmm_1 2009-01-26T04:00:49Z