GbE2c authentication ciscoworks

Fatih Celebi_1 — Sun, 13 May 2007 09:01:45 GMT

Hi,

Anybody have any experience regarding using Ciscoworks with tacacs/radius authentication for GbE2c switches in the c-class bladechassi ?

Re: GbE2c authentication ciscoworks

HEM_2 — Tue, 15 May 2007 07:57:01 GMT

I have set up a GBE2p to authenticate with Cisco ACS (not CiscoWorks) but it may be similar. The tricky thing is getting the correct privilege levels right. This info is for a p-Class GBE2 but should be same for the c-Class:

4) The following mapping exists between TACACS+ privilege levels and
switch management access levels:

TACACS+ priv-lvl = switch management access level
-----------------------------------------------
0 = CLI_AUTH_USER
3 = CLI_AUTH_OPER
6 = CLI_AUTH_ADMIN

All other values of priv-lvl are considered as "access deny".

priv-lvl 15 is mapped to CLI_AUTH_ADMIN and priv-lvl 1 is mapped to
CLI_AUTH_USER for ease of configuration.

from: http://h18023.www1.hp.com/support/files/server/us/revision/7446.html

topic GbE2c authentication ciscoworks in BladeSystem - General

GbE2c authentication ciscoworks

Re: GbE2c authentication ciscoworks