https://community.hpe.com/t5/bladesystem-general/blade-configuration-tool/m-p/4363606#M5221 There are tools where you choose the specification and it shows you a BOM and front &amp; back views.<BR /><A href="http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html" target="_blank">http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html</A><BR /><BR />Or you can use Visio shapes<BR /><A href="http://www.visiocafe.com/hp.htm" target="_blank">http://www.visiocafe.com/hp.htm</A><BR />Pick the HP-Blades zip and unzip it into Visio's My Shapes folder and then pick the c-c-class group. Sun, 22 Feb 2009 09:07:44 GMT Adrian Clint 2009-02-22T09:07:44Z https://community.hpe.com/t5/bladesystem-general/blade-configuration-tool/m-p/4363605#M5220 Hi,<BR /><BR />I am in the process a putting together a Design Proposal Solution. Is there an HP configuration tool for Blades that graphicly shows the back on a c7000 enclosure and the front of the c7000 enclosure where you can pick and choose your components that will be installed? Sat, 21 Feb 2009 15:46:50 GMT https://community.hpe.com/t5/bladesystem-general/blade-configuration-tool/m-p/4363605#M5220 Chrisb_6 2009-02-21T15:46:50Z https://community.hpe.com/t5/bladesystem-general/blade-configuration-tool/m-p/4363606#M5221 There are tools where you choose the specification and it shows you a BOM and front &amp; back views.<BR /><A href="http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html" target="_blank">http://h71028.www7.hp.com/enterprise/cache/80364-0-0-0-121.html</A><BR /><BR />Or you can use Visio shapes<BR /><A href="http://www.visiocafe.com/hp.htm" target="_blank">http://www.visiocafe.com/hp.htm</A><BR />Pick the HP-Blades zip and unzip it into Visio's My Shapes folder and then pick the c-c-class group. Sun, 22 Feb 2009 09:07:44 GMT https://community.hpe.com/t5/bladesystem-general/blade-configuration-tool/m-p/4363606#M5221 Adrian Clint 2009-02-22T09:07:44Z