https://community.hpe.com/t5/bladesystem-general/installing-linux-red-hat-4-on-hpbl460c-server/m-p/4375855#M5385 when i run the linux installation cd on the blade server it comes up with an error saying<BR /><BR />"An error has occured - no calid devices were found on which to create new file systems. Please check your hardware for the cause of this problem. <BR /><BR />When i spoke to HP they said that i had t run the linux cd before i ran the HP smartstart Tue, 10 Mar 2009 14:25:49 GMT leacher01 2009-03-10T14:25:49Z https://community.hpe.com/t5/bladesystem-general/installing-linux-red-hat-4-on-hpbl460c-server/m-p/4375855#M5385 when i run the linux installation cd on the blade server it comes up with an error saying<BR /><BR />"An error has occured - no calid devices were found on which to create new file systems. Please check your hardware for the cause of this problem. <BR /><BR />When i spoke to HP they said that i had t run the linux cd before i ran the HP smartstart Tue, 10 Mar 2009 14:25:49 GMT https://community.hpe.com/t5/bladesystem-general/installing-linux-red-hat-4-on-hpbl460c-server/m-p/4375855#M5385 leacher01 2009-03-10T14:25:49Z https://community.hpe.com/t5/bladesystem-general/installing-linux-red-hat-4-on-hpbl460c-server/m-p/4375856#M5386 <!--!*#-->Assuming that you have hard drives installed in the BL460c, perhaps you have not configured the Smart Array controller.<BR /><BR />Connect to the BL460c KVM or iLO console, and reboot the server. During POST, you will see a prompt to press F8 to configure the Smart Array. That will run the RAID configuration utility, and you can create a RAID volume and save your changes.<BR /><BR />Then try installing Linux again. Wed, 11 Mar 2009 14:02:10 GMT https://community.hpe.com/t5/bladesystem-general/installing-linux-red-hat-4-on-hpbl460c-server/m-p/4375856#M5386 John Cagle 2009-03-11T14:02:10Z