https://community.hpe.com/t5/bladesystem-general/virtual-connect-vmware/m-p/4441876#M6413 Hi,<BR /><BR />Still tinkering with my C7000<BR /><BR />(2 x VC-FC modules, and 2 x VC-1/10GB Ethernet modules)...<BR /><BR />Basically trying now to work out the network side of things..<BR /><BR />I have heard people mention that route based on IP hash is not possible with VC, is this true, if so why??<BR /><BR />I am looking to basically have 6 NIC's per blade and perform the best aggregation/redundancy I can. I have read the Cookbook guide but it does not really help me understand the limitations regarding VC and IP hash?<BR /><BR />I can sort of see the issues as it looks like a lot of the VMware stuff is duplicated in the VC (Shared Uplink and Teaming etc)...<BR /><BR />Any tips? Wed, 17 Jun 2009 18:16:56 GMT UselessUser 2009-06-17T18:16:56Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-vmware/m-p/4441876#M6413 Hi,<BR /><BR />Still tinkering with my C7000<BR /><BR />(2 x VC-FC modules, and 2 x VC-1/10GB Ethernet modules)...<BR /><BR />Basically trying now to work out the network side of things..<BR /><BR />I have heard people mention that route based on IP hash is not possible with VC, is this true, if so why??<BR /><BR />I am looking to basically have 6 NIC's per blade and perform the best aggregation/redundancy I can. I have read the Cookbook guide but it does not really help me understand the limitations regarding VC and IP hash?<BR /><BR />I can sort of see the issues as it looks like a lot of the VMware stuff is duplicated in the VC (Shared Uplink and Teaming etc)...<BR /><BR />Any tips? Wed, 17 Jun 2009 18:16:56 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-vmware/m-p/4441876#M6413 UselessUser 2009-06-17T18:16:56Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-vmware/m-p/4441877#M6414 You can only have two NICs with two VC-1/10GB. Are you looking at purchasing four more VC 1/10GB modules?<BR /><BR />And i think you find the answer to the hash question here.<BR /><A href="http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1245312143266+28353475&amp;threadId=1201089" target="_blank">http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1245312143266+28353475&amp;threadId=1201089</A> Thu, 18 Jun 2009 07:03:26 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-vmware/m-p/4441877#M6414 Adrian Clint 2009-06-18T07:03:26Z