topic Configuring Flex-10 in BladeSystem - General

Configuring Flex-10

Gene Kenny — Wed, 24 Jun 2009 15:37:05 GMT

Hello

I am setting up my first Flex-10. I create a 4 networks and I adjust the speed of each nic under the advance tab. When I go to server profiles I only see Lom1:a Bay 1 and Lom2:a bay2. I do not see the other 6 nics. I do see the nics in the device information tab. The VC firmware is at 2.10.

Thanks,

Re: Configuring Flex-10

JKytsi — Wed, 24 Jun 2009 17:55:06 GMT

For starters ...You are using factory default MAC addresses and VC isn't a VC with those.

Re: Configuring Flex-10

Gene Kenny — Tue, 30 Jun 2009 20:06:44 GMT

Thanks, I changed the the mac addresses to HP defined and I am still seeing only the two nics, under server profile. I do see all the nics under the server information tab on the OA

Re: Configuring Flex-10

David Claypool — Thu, 02 Jul 2009 15:55:19 GMT

What exact blade server model has this profile been assigned to?

Re: Configuring Flex-10

Gene Kenny — Mon, 06 Jul 2009 12:37:01 GMT

The blade is a BL460C G6 sing the NC373i nic

Re: Configuring Flex-10

raadek — Fri, 17 Jul 2009 13:49:30 GMT

I vaguely remember it always displays just 4 connections initially (for whatever reason).

Simply clicking "Add network connection" should solve it though.