topic Stacking Link FAILED in BladeSystem - General

Stacking Link FAILED

Jafiz Nazim — Thu, 30 Jul 2009 03:59:38 GMT

One of my c3000 VC staking link status is showing as FAILED and Redundancy Status:No Redundancy.

Could any one pls help me to fix this issue.

Re: Stacking Link FAILED

JKytsi — Thu, 30 Jul 2009 05:03:41 GMT

You have only one VC module ?

Re: Stacking Link FAILED

Jafiz Nazim — Thu, 30 Jul 2009 05:07:49 GMT

1 have two VC'c

Re: Stacking Link FAILED

JKytsi — Thu, 30 Jul 2009 08:40:53 GMT

well ...are the modules stacked ? = connected to each other with 10Gb or 1Gb cable.

Re: Stacking Link FAILED

Jafiz Nazim — Thu, 30 Jul 2009 08:44:42 GMT

Yes it stacked through X0 port......

Re: Stacking Link FAILED

JKytsi — Thu, 30 Jul 2009 09:45:37 GMT

and what link it says failed ? There is horizontal stacking between modules but on c3000 that's not possible (all embedded NICs go to interconnect bay1).

Re: Stacking Link FAILED

JKytsi — Fri, 31 Jul 2009 16:51:41 GMT

So ... ?