https://community.hpe.com/t5/bladesystem-general/blade-servers/m-p/4475170#M6867 I am trying to create an image on a BLade Server 460c, so I can image 7 additional servers using this image. I was able to find an image already created, and add the software I needed to that image. What happens next?<BR /><BR />I am using Altiris Deployment Console.<BR /><BR />Any Ideas Fri, 07 Aug 2009 01:28:26 GMT MIchael Ross_6 2009-08-07T01:28:26Z https://community.hpe.com/t5/bladesystem-general/blade-servers/m-p/4475170#M6867 I am trying to create an image on a BLade Server 460c, so I can image 7 additional servers using this image. I was able to find an image already created, and add the software I needed to that image. What happens next?<BR /><BR />I am using Altiris Deployment Console.<BR /><BR />Any Ideas Fri, 07 Aug 2009 01:28:26 GMT https://community.hpe.com/t5/bladesystem-general/blade-servers/m-p/4475170#M6867 MIchael Ross_6 2009-08-07T01:28:26Z https://community.hpe.com/t5/bladesystem-general/blade-servers/m-p/4475171#M6868 Please refer to the below Userguide. If you have the image in your Altris server it will be just Drag and Drop across the new ones.<BR /><BR /><BR /><A href="http://docs.hp.com/en/352869-406/352869-406.pdf" target="_blank">http://docs.hp.com/en/352869-406/352869-406.pdf</A><BR /><BR /><A href="http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01154890/c01154890.pdf" target="_blank">http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01154890/c01154890.pdf</A> Mon, 10 Aug 2009 09:02:24 GMT https://community.hpe.com/t5/bladesystem-general/blade-servers/m-p/4475171#M6868 Raghuarch 2009-08-10T09:02:24Z