https://community.hpe.com/t5/bladesystem-general/error-during-creating-a-vc-domain-group/m-p/4486946#M7139 Try removing any mezzanine cards from the server and then try assigning the profile.<BR />What is it in this bay and what is in the adjacent bays. Thu, 27 Aug 2009 07:56:22 GMT Adrian Clint 2009-08-27T07:56:22Z https://community.hpe.com/t5/bladesystem-general/error-during-creating-a-vc-domain-group/m-p/4486945#M7138 Hi All,<BR />Trying to create a VC Domain group on C3000 Enclosure. But it comes out with the following error.<BR />********************************************<BR />Error during Create VC Domain Group [scg]. Details: The server profile cannot be assigned to the Server Bay because the device associated to the Server Bay is not a valid device type. To verify that the device in the bay is a valid device type, see the Virtual Connect Manager Support Matrix.<BR />*********************************************<BR /><BR />Saw the support matrix and the firmware versions are up-to-date . Can you pls show some light on this.<BR /><BR />Thanks,<BR />Regards,<BR />Raghu Thu, 27 Aug 2009 06:57:04 GMT https://community.hpe.com/t5/bladesystem-general/error-during-creating-a-vc-domain-group/m-p/4486945#M7138 Raghu Chikkamenahalli 2009-08-27T06:57:04Z https://community.hpe.com/t5/bladesystem-general/error-during-creating-a-vc-domain-group/m-p/4486946#M7139 Try removing any mezzanine cards from the server and then try assigning the profile.<BR />What is it in this bay and what is in the adjacent bays. Thu, 27 Aug 2009 07:56:22 GMT https://community.hpe.com/t5/bladesystem-general/error-during-creating-a-vc-domain-group/m-p/4486946#M7139 Adrian Clint 2009-08-27T07:56:22Z