topic C7000 enclosure issue in BladeSystem - General

C7000 enclosure issue

Jan Nielsen_1 — Wed, 30 Sep 2009 05:42:03 GMT

Hi All,

I have 2 C7000 enclosures and they are connected through the enclosure link.
After upgrading the enclosures firmware to 2.52 we keep getting an alert saying:

"Enclosure, "Blade1", has detected the removal of 1 enclosure from the enclosure link."

And right after that we get:

"Enclosure, "Blade1", has detected the addition of 1 enclosure to the enclosure link"

Has anyone seen this bfore and if Yes how do we fix it ?.

Thanks,
Strunk

Re: C7000 enclosure issue

Michal Kapalka (mikap) — Wed, 30 Sep 2009 08:50:36 GMT

hi,

i think this is a firmware issue with informational character. ( more informational )

mikap

Re: C7000 enclosure issue

Jan Nielsen_1 — Wed, 30 Sep 2009 08:59:00 GMT

So You are saying that this is something that we need to live with ??

/Strunk

Re: C7000 enclosure issue

Michal Kapalka (mikap) — Wed, 30 Sep 2009 09:16:42 GMT

hi,

this firmware is not the latest :

your : 2.52
3 Aug 2009

current public : 2.60
14 Sep 2009

try to use the latest firmware :

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3692952〈=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=3709945&prodSeriesId=1844065

for windows 2003 bundle :

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3692952&prodTypeId=3709945&prodSeriesId=1844065&swLang=13&taskId=135&swEnvOID=1005

release notes :

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=1844065&swItem=MTX-c024bb22c9214dbe9dedc7897e&prodNameId=3692952&swEnvOID=1005&swLang=13&taskId=135&mode=4&idx=2

mikap

Re: C7000 enclosure issue

Netwerk en systeembehee — Fri, 30 Oct 2009 08:23:05 GMT

Hi,

I updated all enclosures to version 2.60 but we have still the same problem.

Kind Regards,

Ronald Aben

Re: C7000 enclosure issue

Michal Kapalka (mikap) — Fri, 30 Oct 2009 08:37:16 GMT

hi,

ok if this problem is still on the c7000,

you should open a HW call to the HP.

mikap

Re: C7000 enclosure issue

The Brit — Fri, 30 Oct 2009 10:46:09 GMT

Hi Strunk,
How often is this message being generated?

and, are both of your enclosures upgraded to OA 2.52?? (What was the pre-upgrade version?)

I have similar setup using 2.51, and I dont see this issue.

Dave

Re: C7000 enclosure issue

Jan Nielsen_1 — Fri, 30 Oct 2009 10:52:19 GMT

I'm running 2.60 on both enclosures now and i'm still having the issue.

It's random how often it happens. Sometimes 3 times a day sometimes 1 time during a day and then perhaps 4 days with no alarm. and then it starts again.

I was running 2.51 before the upgrade.

/Strunk