topic Re: C7000 in BladeSystem - General

C7000

l4 great — Fri, 02 Oct 2009 15:15:53 GMT

I need to put the OA of a C7000 in a different VLAN from main LAN, whats the best thing to do?

Re: C7000

The Brit — Fri, 02 Oct 2009 16:18:27 GMT

What do you mean by "main LAN"??

The OA's, IC Modules, and Blade ILo's must all be on the same subnet within the enclosure. This is set up in the "EBIPA" page under Enclosure Settings.

Need a clearer description of your problem

Dave.

Re: C7000

l4 great — Fri, 02 Oct 2009 16:29:49 GMT

hi and thanking you for your kind response, well at mo all ilo and on board administrator of the enclosure are on same lan as all other devices ie main lan ie servers,printers,clients lan. i need to move the on board administartor to its own vlan, but still be able to attach to it from main lan

Re: C7000

HEM_2 — Fri, 02 Oct 2009 16:33:48 GMT

so you need to create a new VLAN in your infrastructure and enable routing between that VLAN and the main LAN. Then you need to reconfigure the IP Addresses used for OA/ILO/Interconnects

Re: C7000

l4 great — Fri, 02 Oct 2009 16:38:43 GMT

that sounds very good and correct, were is a goodin place to start to creation of new vlan? on the interconnect switch perhaps or LAN core switch, what can one use for routing is also a question?