topic Re: Getting sensor information for the submitted sensor failed in BladeSystem - General

Getting sensor information for the submitted sensor failed

Sreejith Kaliyam — Wed, 18 Jul 2007 04:14:19 GMT

am having a problem at the time of accessing the blade from RDP SERVER, SHOWING me the following error "Getting sensor information for the submitted sensor failed"showing the blade UNKNOWN. WILL YOU PLEASE REPLY THE SOLUTION ON THIS CASE

Re: Getting sensor information for the submitted sensor failed

Dave Parker — Tue, 24 Jul 2007 14:11:54 GMT

I had the same problem on 2 bl685c's. I fixed it by going into the individual ilo's for the blades, selecting diagnostics and reset the the ilo.

Re: Getting sensor information for the submitted sensor failed

Raghuarch — Wed, 25 Jul 2007 15:53:30 GMT

Some times the blades ilo doesn't reply the Temperature sensor information back.
At that time you will see the "Getting sensor information for the submitted sensor failed"

Make sure the ilo is active. If the Ilo is active Try to go to the Temperature information page if the if there is data in the page then you should be able to access the server from RDP.

Otherwise reset the iLo it will fix the problem.