https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537387#M8248 thanks!! it works. Tue, 24 Nov 2009 09:53:50 GMT WojtekZ 2009-11-24T09:53:50Z https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537385#M8246 I have problem to connect throught ILO to server Blade BL20p due to disabled NIC interfaces on it.<BR />Can't connect neither to default 192.168.1.1 (console-cable) nor previously configured Ip addresses. Can someone help me?<BR /> Fri, 20 Nov 2009 10:40:20 GMT https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537385#M8246 WojtekZ 2009-11-20T10:40:20Z https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537386#M8247 Pull the lid off. Underneath the lid is a label with DIP switch settings.<BR />Try enabling the iLO reset.<BR />Plug the server back in.<BR />Power it on.<BR />Pull it out again.<BR />Disable the iP reset switch.<BR />Try connecting again on console cable to 192.168.1.1 Fri, 20 Nov 2009 10:59:49 GMT https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537386#M8247 Adrian Clint 2009-11-20T10:59:49Z https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537387#M8248 thanks!! it works. Tue, 24 Nov 2009 09:53:50 GMT https://community.hpe.com/t5/bladesystem-general/blade-bl20p-connection-problem/m-p/4537387#M8248 WojtekZ 2009-11-24T09:53:50Z