topic Re: Blade server 460c Running it outside the enclosure in BladeSystem - General

Blade server 460c Running it outside the enclosure

kreilly — Tue, 24 Nov 2009 19:23:57 GMT

I am trying to see if there is a way of getting cables or hooking a power supply up to the blade server and have it run on my network without it in an enclosure. I am switching locations and moving part of the company over an i want to pull one blade server out and have it run at the new location but connect to the network. I do not have a spare enclosure but i have a couple rack servers with power supplies. I don't seem to have any cables to hook a monitor up or keyboard , network.
If anyone can direct me in the direction.
Thanks

Re: Blade server 460c Running it outside the enclosure

Michal Kapalka (mikap) — Tue, 24 Nov 2009 22:37:33 GMT

hi,

i think there is no other solution as an HP C3000/C7000 enclosure.

mikap

Re: Blade server 460c Running it outside the enclosure

Adrian Clint — Tue, 24 Nov 2009 22:44:19 GMT

Take 100 off the blade server model and try and borrow, beg, hire a rackmount server of the new model no.
Eg if its a BL465 then you want a DL365. Generation numbers can make it more difficult so ask here.

Move the drives from the blade to the rackmount server and just re-boot.

Re: Blade server 460c Running it outside the enclosure

rick jones — Wed, 25 Nov 2009 01:10:37 GMT

Given that virtually all(*) the I/O connections from the Blade go through the chassis, even if you could get power to it when outside the chassis, there would be no way to speak to it. That would make the system rather useless.

(*) Yes, there is the front connector that connects to the "SUV" (Serial, USB and Video) cable, but that doesn't really count :)

Re: Blade server 460c Running it outside the enclosure

kreilly — Wed, 25 Nov 2009 02:09:12 GMT

ok so what is the cheapest used chassis that will support the HP Proliant BL460c? Anyone have something used that i can buy?
Thanks

Re: Blade server 460c Running it outside the enclosure

JKytsi — Wed, 25 Nov 2009 08:18:52 GMT

c3000 is the cheapest one. But this original guestion is something else =)

Re: Blade server 460c Running it outside the enclosure

Torsten. — Wed, 25 Nov 2009 08:38:23 GMT

As said earlier, it will make much more sense to get another standalone server and transfer the OS to it during this time.

Re: Blade server 460c Running it outside the enclosure

kreilly — Wed, 25 Nov 2009 16:29:04 GMT

ok i was trying to avoid using a new server. budget is tight. I only have one enclosure so i would need to buy another one since there is no way of getting cables to hook up to the blade by itself. Since the enclosure is probably going to cost $$ i might as well just use a workstation i have and copy the serve on to it but until i move the blade enclosure to the new location it will be painfully slow. I don't have to many powerful machines to use as servers. I was just hoping that there was a way to leave one blade server in the enclosure at building "A" and run the other blade server at building "B" outside the enclosure until we move the rest of the company from Building "A" to building "B" then the 2 Blade servers would be in the enclosure together again.
Thanks for your help.

Re: Blade server 460c Running it outside the enclosure

Camprr23 — Tue, 18 Jul 2023 08:29:55 GMT

Just to dig up and old thread from 2009! There are several people who have done this now.. https://ubl0g.blogspot.com/2020/10/project-blade-network-server.html