https://community.hpe.com/t5/bladesystem-general/configuration-of-nortel-8600-core-switches-for-virtual-connect/m-p/4541650#M8353 Hi,<BR /><BR />Anyone has experience with the network configuration that is needed for Virtual Connect to work. I found documents for Cisco &amp; Procurve but nothing for Nortel.<BR /><BR />Problem that we have is that we have 2 switches, each one goes to a virtual connect module.<BR />We enabled LACP so when one of the switches fails, the other one takes over. But that doesn't happen. <BR /><BR />I just would like to know if someone managed to get this configuration to work.<BR /><BR />Thanks,<BR />Erik Mon, 30 Nov 2009 17:45:00 GMT Erik DT 2009-11-30T17:45:00Z https://community.hpe.com/t5/bladesystem-general/configuration-of-nortel-8600-core-switches-for-virtual-connect/m-p/4541650#M8353 Hi,<BR /><BR />Anyone has experience with the network configuration that is needed for Virtual Connect to work. I found documents for Cisco &amp; Procurve but nothing for Nortel.<BR /><BR />Problem that we have is that we have 2 switches, each one goes to a virtual connect module.<BR />We enabled LACP so when one of the switches fails, the other one takes over. But that doesn't happen. <BR /><BR />I just would like to know if someone managed to get this configuration to work.<BR /><BR />Thanks,<BR />Erik Mon, 30 Nov 2009 17:45:00 GMT https://community.hpe.com/t5/bladesystem-general/configuration-of-nortel-8600-core-switches-for-virtual-connect/m-p/4541650#M8353 Erik DT 2009-11-30T17:45:00Z https://community.hpe.com/t5/bladesystem-general/configuration-of-nortel-8600-core-switches-for-virtual-connect/m-p/4541651#M8354 I got it working on the Dell PowerConnect 6248 switch. I can send you my port and channel configuration commands if you think that would help you out at all. Tue, 01 Dec 2009 01:19:35 GMT https://community.hpe.com/t5/bladesystem-general/configuration-of-nortel-8600-core-switches-for-virtual-connect/m-p/4541651#M8354 JonathanT 2009-12-01T01:19:35Z